Invicta Men's 9937 Pro Diver Collection Coin-Edge Swiss Automatic Watch

Invicta Men's 9937 Pro Diver Collection Coin-Edge Swiss Automatic Watch Review

Invicta Men's 9937 Pro Diver Collection Coin-Edge Swiss Automatic Watch Feature

• Quality Swiss Automatic movement; functions without a battery; powers automatically with the movement of your arm
• Durable flame-fusion crystal; stainless steel case and band
• Exhibition case Back; magnified date Window
• Luminous hands and Markers
• Water-resistant to 660 feet (200 M)

A clean black dial distinguishes this durable, dark-hued Invicta Men's Pro Diver Collection Coin-Edge Swiss Automatic Watch. A polished stainless steel band joins to a durable stainless steel case that's topped by a black, ion-coated, unidirectional coin-edge bezel that is imprinted with white indexes and Arabic numeral minute indicators in increments of 10. The striking black dial is protected by a scratch-resistant, sapphire-coated window, showcasing luminescent geometric hour indicators that complement luminescent, silver-tone hands. Small white minute markers and a date window at the three o'clock position complete the look of the visually appealing dial. This Swiss-automatic diving watch is water resistant to an impressive 660 feet (200 M) and is presented in a yellow Invicta gift box along with a buffing cloth.

Screw Down Crowns: Many Invicta watches are equipped with a screw down crown to help prevent water infiltration. This is most common on our Diver models. In order to adjust the date and/or time on such a watch, you must first unscrew the crown before you can gently pull it out to its first or second click stop position. To do this, simply rotate the crown counterclockwise until it springs open. When you have finished setting the watch, the crown must then be pushed in and screwed back in tightly. Not doing so will cancel the water resistance of the watch and will void all warranties from the manufacturer. Overall, this process should not require a lot of effort or force.

Automatic Watches

Automatic watches donot operate on batteries. Automatic watches are made up of about 130 or more parts that work together to tell time. Automatic movements mark the passage of time by a series of gear mechanisms, and are wound by the movement of your wrist as you wear it. The gear train then transmits the power to the escapement, which distributes the impulses, turning the balance wheel. The balance wheel is the time regulating organ of a mechanical watch, which vibrates on a spiral hairspring. Lengthening or shortening the balance spring makes the balance wheel go faster or slower to advance or retard the watch. The travel of the balance wheel from one extreme to the other and back again is called oscillation. Lastly, automatic movements come in different types, including movements that are Swiss-made, Japanese-made, and more.

Also referred to as self-winding, watches with automatic movements utilize kinetic energy, the swinging of your arm, to provide energy to an oscillating rotor to keep the watch ticking. They're considered more satisfying to watch collectors (horologists) because of the engineering artistry that goes into the hundreds of parts that make up the movement. If you do not wear an automatic watch consistently (for about 8 to 12 hours a day), you can keep the watch powered with a watch winder (a great gift for collectors).